BDT-T series concrete products production line with excellent mechanical properties, all nodes are processed by PLC program, and industrial visual controller is used as a man-machine dialogue window. The time and control points in the production process of all products can be adjusted in the man-machine interface and displayed graphically. The tuning of mechanical action of BDT-T series forming machine ensures its long-term stable, fast and high-frequency reciprocating motion, avoids the lag or advance phenomenon of hydraulic system in fast and high-frequency reciprocating motion. It adopts the feeding agitation mechanism. After the pushing and stacking die box, its mechanism agitates at high frequency, and realizes uniform distribution, which creates favorable conditions for the next die pressing and forming. AC series moulding machine is also equipped with shock absorber, so that when the die head is pressed down into the mould box, the influence from the vibration motor is weakened, and the internal quality of the product is ensured. When demoulding, BDT-T series moulding machines adopt soft elastic contact at the moment of demoulding, allowing a short time to be set, using the rebound recovery of elastic contact to ease the friction force between the mould box and the internal block, so that the complete demoulding at the bottom of the product can meet the requirements of frequent start and stop of the machine. The main moulding machine adopts pneumatic clutch device, which makes the start and brake flexible and accurate, and the transmission moment larger. Long time and high frequency work is not affected and maintenance is small; different vibration modes of equipment will directly lead to product range, Bessel mould vibration production line will be your best choice for producing high-strength load-bearing, luxury decoration, light filling block and high-end floor tile products!
Technical parameters:
Number of moulding blocks: 9 (390 *190 *190)/plates (mm)
Bracket area (steel): 1400X800(mm)
Work area: 1340X740 (mm)
Production height: 50-350 (mm)
Vibration mode: mode vibration
Molding cycle: 13-22S (depending on product and ingredient, different cycle)
Total installed power:
Size: 6750 *3300 *4100 (mm)
Equipment deadweight: 22 t
Detailed Table of Output of Single Equipment
Name and Specification | Forming Block number | cycle | One hour | 8 hours | Annual output |
Hollow block 390×190×190(mm) | 9 | 13-22S | 2160 pieces | 17280 pieces | 518.4 million pieces |
Standard Brick 240×115×53(mm) | 55 | 13-22S | 13200 pieces | 105600 pieces | 3168 million pieces |
Paver without face mix 200x100x60mm | 36 |
13-22S | 8640 pieces | 69120 pieces | 2073.6 million piece |
interlocking Paver 225x112x60mm | 30 | 13-22S | 6000 pieces | 48000 pieces | 1440 million piece |
Hollow Block 390x90x190mm | 18 | 13-22S | 3600 pieces | 28800 pieces | 864 million piece |
Paver with face mix 200x100x60mm | 36 | 13-22S | 6480 pieces | 51840 pieces | 1555.2 million piece |